How To Solder Wires Correctly

Because it basically has no temperature control and such soldering irons typically have the tip at really high temperatures like 400-500 degrees Celsius Due to this high temperature the flux inside the solder wire you use has practically no time to turn into liquid and flow over the area you want to solder and do its work clean the area make it ready for the actual solder to work and glue the two.

How to solder wires correctly. Soldering Two Wires. At some point over the next 2-10 seconds depending on how hot your iron is the wires will be hot enough to melt the solder. The wires will begin to heat up.

Then we collect a little solder with a soldering iron and drive it along the wire. Solder the Wire Joint. Lastly put Solder on the wire especially on the tip.

When you solder items together youll typically be using the hot metal tip of the iron to melt a small amount of solder alloy around and. Tin the tip Tips for prolonging tip life making soldering easier. Capillary action plays an important role in distributing the solder throughout the splice.

Lock and Firmly Twist the Stripped Wires Together. Note that the wire will get hot so you should consider holding it with some tweezers or similar. But even in the soldering community theres still room to argue.

The process is carried out using a small amount of metal alloy known as solder and a heated handheld tool called a soldering iron. When the Solder is melted it will automatically create a strong bond between the connector and wire. SMT Solder Wire is done as follows.

Touch the tip of the soldering iron to the wires and keep it there. Sand the bare ends with an emery cloth knife. Using the soldering gun heat the wiring up enough to melt the solder and gently apply the soldering to the wire with the soldering gun touching the wire.