How To Use Your Router Table As A Jointer

Yes its true for the cost of a bit you can turn your router table into a biscuit joiner and save yourself.

How to use your router table as a jointer. To set up your router table for jointing first make sure the bit and your router table are perpendicular to each other. For longer stock lay out your boards on a scrap piece of ply in the order that you want them laminated and clamp them at both ends to your bench photo 10. Edge jointing with a router like edge jointing with a table saw is another common method for making jointable edges without a jointer check out our 8 jointer comparison if youre considering the purchase.

Your best bet to get a truly straight edge would be to use your router table. As with most router table operations there is no need to align the miter track with the fence since it is not used in the jointing operation - the fence guides the stock. Using A Router Table As Planer.

Make multiple passes cutting on the left side of the bit until the edge is jointed. Position the router table fence so that the front of the bearing on the bit and the fence face are in line with one another. Remove the riving knife.

Place your laminate piece at the left-hand edge of the bit-clearance notch in the router table fence. You can use an inverted table-mounted router to straighten narrow edges. Rockler offers a set of Router Table Jointing Shims that make setting up to use your router as a joiner quick and painless.

Use something like a straight edge or ruler to check that they are precisely aligned. It requires a straight bit and an offset fence. In order to use the router table as a jointer it is important that you offset the routers fences so that they are uneven.

This will ensure that the finger profiles that are cut are accurate so that the joint. A jointer has an outfeed table set at the height of the cutter and an adjustable infeed table. Photo 3 Photo 4.