How Do You Solder Two Small Wires Together

Set up your work area so everything is within easy reach.

How do you solder two small wires together. Touch the tip of the soldering iron to the copper wires. Twisting the wires together and soldering is often the best method but there are two. If the wire is stranded twist the strands together with your fingers.

The process is carried out using a small amount of metal alloy known as solder and a heated handheld tool called a soldering iron. The wires are so small that the solder doesnt really stick so what you have to do is as quickly as possible melt the solder onto the iron but with the joint DIRECTLY in the middle of the two. Here the solder does not act as a glue that holds the two wires together.

Make sure the soldering iron is placed where you wont accidentally bump it. Now that the two tinned wires are wrapped around each other we can re-apply the soldering iron and the solder from each wire will melt and mingle forming a nice solid solder joint. Solder the Splice Together.

How to Solder Two Small Wires - YouTube. They do tend to be a little lumpy and look a tad misshapen under the heat-shrink tube. This tool worked the best for me in the automotive application and make it a breeze get that tuff to reach wires repaired soldered and sealed properly.

You should carefully remove 12 inch of the wire insulation about 1 inch back from the stripped end of your wire. If you do it right you get a big melted bead ON the iron but with the wires running through the middle of it. Use rosin core solder.

Apply flux solder then slide shrink over and hit with heat gun. A solder join - wires twisted together not so good. This video starts by showing the simplest technique for twisting two wires together.