How To Solder Copper Pipe With A Heat Gun

A heat gun is a much safer alternative and does not have a dangerous naked flame to come into contact with flammable building materials.

How to solder copper pipe with a heat gun. A heat gun should always be used with care around copper plumbing where solder connectors have been used as the heat can melt the solder and weaken the joints. Hold the solder to the joint you are trying to solder. Remove Flame from Fitting.

Heat the Fitting to Sweat the Copper Pipe. Once all parts are cleaned DO NOT TOUCH THE AREA with your hands apply flux to ALL partsmake sure all pipes are bottomed into the fittings heat AWAY from the joint and draw the solder into the joint it will suck right into and run thru by itself and you will see it start to drip out keep a rag with you and once soldered gently WIPE the joint. The solder began to melt on the copper plate and I happily filled the entire void with solder.

It can also sweat copper pipes or caramelize but that would be overkill. When you use a propane torch you must give the heat a chance to soak into the copper pipe connection which can take anywhere from 30 to 60 seconds. Clean and deburr your pipe and fitting as you would for regular copper pipe soldering.

Touch the Solder to the Pipe. By using a torch heat the fitting or joint for a few seconds up to a minute. Bending plastic pipes - 200 to 300C.

You might consider practicing a little on some scrap pipe and a. Step By Step Guide On How To Solder Copper Pipes. Push the plug into the pipe with the applicator tube provided.

I wouldnt say never use a heat gun for soldering pipes together. Squiggle a line like you would with glue. Can you use a soldering iron to solder copper pipes.