How To Solder 2 Thin Wires Together

Leave a correctly sized solder gap between insulation and solder joint.

How to solder 2 thin wires together. Sold in the electronics department. Heat up the joint and melt the solder with the wire not the soldering iron. Splicing Wires Without Solder.

Buy Now 97 off. Jan 29 2009 at 1224 AM Post 3 of 23. The best way to splice wires is to wrap them together tightly using multiple twists to.

In the first case make sure the bare end of the wire is at least long enough to make a half tun around the screw and always wrap it round the screw in the same direction as you will be tightening it. Works 9 times out of 10 and only takes a min to do with no stress. Wire-wrap was considered an adequate technique for a decade.

The covered wire will end up almost touching with the twisted wire sticking out at an angle. Solder with shrink wrap. If you have a solder pot then soldering through enamel wire can be tinned in the solder pot with no trimming.

On the solder station. In the case of stranded wire always keep the individual strands together after stripping the insulation by firmly twisting them together or better still applying a little solder. Want to master Microsoft Excel and take your work-from-home job prospects to the next level.

Work from multiple angles and make sure to get thorough coverage. This also ensures that all of the wires are making an electrical connection. Soldering is the process of using a melted filler metal.