How Do You Clean A Dirty Soldering Iron Tip

Keep deeping it in the paste while heating so that it doesnt become in contact to oxygen.

How do you clean a dirty soldering iron tip. It consists of soft metal shavings that are coated with flux. It is a much stronger flux that will clean and tin the tip. Use fluxes Spongeless and metal wool to remove small amounts of contaminants from your soldering iron tips during soldering circuit board or any other components.

Clean The Soldering Irons Tip. Dont let it run dry. Just rub the soldering iron tip on it after each solder.

A trick I learned from an aerospace tech is to use a lot of solder when I clean the tip using the excess solder to almost flush off the tip. Then dip the tip in the cleaner and do a slight twist action. The best way you can do this is to make sure to always re tin your soldering iron.

You also can clean your soldering iron tip with a sponge while using it to keep it clean. This should lead to a clean shiny tip ready for use for more info see this video. It is hazardous so please read all safety tips included in or on the packaging.

It does create a lot of smoke so it is better not to let the tip get so dirty that you need to use tip. A simple dab on the tip should do the job. Another option is to use tip cleaner.

Tip cleaner As its pretty expensive we only recommend you to use it if you have a high-end and costly soldering iron So these are the items you need if you want to clean your soldering iron by following multiple ways. This step will coat the iron in a mixture of flux and solder. This works well if your tip hasnt been cleaned for a while.