How To Change A Soldering Iron Tip

This should lead to a clean shiny tip ready for use for more info see this video.

How to change a soldering iron tip. This helps remove impurities such as remnants of solder from previous projects grease oxidation etc. One minute you will be soldering the leads of a 40 pin IC to pads and the next thing you might do is remove a component and clean the components pads with solder wick. If some of the oxides are just sticking really well you could try to mildly abrade them on a brass sponge copper braid or similar but you cant be too hard or you will damage the iron plating good tips are typically copper core plated with iron then chromium everywhere but the.

Leave for 4-5 Seconds and then Take out the Iron. Every time you take a break from soldering and set the iron in its holder the best practice is to re-tin the tip to. Find the small screw on the soldering iron shaft near the tip and unscrew it by inserting the screwdriver and turn counter clockwise.

When I used the old cheapy soldering irons I would just tin them with regular solder and file smooth and re-tin as needed. Search Findchips and Save Today. Heat it up to around 350C and wait.

If it doesnt you need to remove all solder and grind the tip again more thoroughly. Before soldering clean your tip with a clean cloth and some alcohol. The idea was that the silver solder would prolong the life of the tip.

Turn off and unplug your iron or base. Damaging your iron is not only possible but easy when replacing the tips so procede with care. Never use too much pressure.

These are used to replace any damaged tips and each tip serves a different purpose. The flux in tip cleaner removes the oxidation and build up from the soldering iron tip and then the solder re-tins the tip ready for use. Clean the tinned tip and you have a refurbished soldering tip.