Best Way To Clean Solder Tip

You use the other screwdriver as a wick.

Best way to clean solder tip. Each time you clean the soldering iron and put it away apply a fresh solder to the tip. Try not to leave the iron sitting hot on the bench while not in use. If your soldering tip becomes detinned oxidized it can be restored in a number of ways.

ConKbot on September 13 2013 015512 pm. Once clean and shiny perform tinning and now your tool is ready to use. Then dip into the tin of tinner cleaner with a slight twisting action.

Unscrew the pieces of the soldering pump to disassemble it. Soldering iron only works if there is a temperature difference. Use stainless steel wool flux and thick clothe to clean the tip.

With the iron tip cold use a polishing bar. Then dip the tip in the cleaner and do a slight twist action. Good soldering process is important.

The wire sponges made for cleaning soldering tips are probably better but you can also just use a brass or copper coated pot scrubber from the grocery store. It is hazardous so please read all safety tips included in or on the packaging. The best solder for oxidation prevention is.

Using a wet sponge will reduce the heat of the tip. Use a protective layer of solder The easiest way to prevent oxidation of a solder tip is to protect it with a layer of solder. A polyurethane foam bar with embedded abrasives which is used to polish the working end of the tip to remove surface oxides.