How To Use Bleach To Clean Clothes

Try using one part bleach to four or five parts water.

How to use bleach to clean clothes. Mix 1 teaspoon bleach with 2 teaspoons warm water. Step 1 separate the white cloth and remove the substances staining it immediately. Then you can dry the load of clothes.

Ensure it is thoroughly washed out of fabrics before use again. If the stain is still there after 15 minutes bleach wont remove it and you risk damaging the fabric if you continue to soak it. Do use chlorine bleach on natural fibers like cotton linen and on synthetic and permanent press fabrics rayon acetate polyester.

Then start to rub the cotton wool. Instead of using harsh bleach on your fabrics you can use OxiClean which removes staining and spots without breaking down the fibers of the fabrics. For Oxygen Bleach add directly to the wash water before the clothes are added.

Do a pretest on the fabric to see if the fabric is suitable for bleaching mix the bleach solution and place one drop in an inconspicuous place. Respecting the care labels wash the garment as normal and then check the results. For tough stains soak white clothes in 14 cup regular bleach per gallon of cool water for about five to 10 minutes.

Submerge your clothes into the mixture of salt water and bleach. While pine oil is safe for most fabrics in your washer a general rule of thumb is not to use pine oil on clothing like wool or silk. When you use bleach to remove spots and staining from your clothing you can often be left with clothing that is discolored or covered in holes.

Bleach performs best when used with hot water. While chlorine bleach can be used safely on dyedcoloured fabrics to remove stains when it has been diluted to a low enough colourfast concentration it will irreversibly removed colour from natural fabrics such as cotton if used at a concentration which is too high. Szymon BrzoskaThe Style Stalker.