How To Solder Wire Tips

Before soldering the wires clean the bare wire with a blade to remove rust or dirt.

How to solder wire tips. If you want to join two wires with solder the first thing you should do is to tin the two wires. If the wire is stranded use your fingers to twist the strands together. Apply Solder Flux to the Wire Joint.

You can also apply some solder. A clean surface is required for good soldering. Safety Tips for Soldering Ways.

Then touch the tip of the soldering iron to the bottom side of the wire so the solder pool is in contact with the wire. Ad Safe Trading Solder Wire Extruding Machine on Leading B2B Platform. The wires will melt and will get soldered together.

Insert Heat Shrink Tubing through the Wire to Cover the Solder Joint. After wrapping the wires tightly around each other use a soldering iron to heat the wrapped portion of the wires. When soldering it is always a good idea to disconnect the wires from the electronics whenever possible as the heat can easily transfer to the electrical components.

Hold the two tinned wires on top of each other and touch the soldering iron to both wires. To solder wires grab the proper tools to work with wire such as wire cutters wire stripper and plyers. This will heat the wire.

After completing the soldering double-check the joints for any shorting of leads. Wires should be soldered firmly to prevent loose contact. With the soldering iron in one hand and solder in the other place the soldering iron tip at the end of the twisted core.