How To Solder Wire Properly
When the Solder is melted it will automatically create a strong bond between the connector and wire.
How to solder wire properly. Learn How to Solder Correctly. If you want to join two wires with solder the first thing you should do is to tin the two wires. And allow the solder to melt.
Soldering Two Wires. This process should melt the solder and coat both wires evenly. You can touch the solder to the wires not to.
The process of soldering is taking two or more wires and joining them together and then using heat to melt electrical solder connecting those two wires permanently. At some point over the next 2-10 seconds depending on how hot your iron is the wires will be hot enough to melt the solder. The process is carried out using a small amount of metal alloy known as solder and a heated handheld tool called a soldering iron.
When done properly you have a strong conductive connection that turns two separate wires into one. Lastly put Solder on the wire especially on the tip. Using a Wire Stripper Strip the Wires to Desired Length.
Make sure to heat it before because of that the Solder melts and joints with the connector. Repeat this process on the other wire. You must tin the wire and the most.
Apply Solder Flux to the Wire Joint. How to Solder Wires. Solder the Wire Joint.