How To Solder Two Stranded Wires Together

For low voltage applications fan out the copper strands and then twist them together.

How to solder two stranded wires together. 1 Strip the wires of about 12 in. When done properly you have a strong conductive connection that turns two separate wires into one. 1 Strip the wires of about 12 in.

Tin the soldering gun ie melt a little solder on it. On the solder station. Screw 16 into terminal strips or use crimps or solder into large holes on pcb.

Tinning the tips of stranded wires holds the fine wires together and makes it easy to connect them to screw terminals or other connectors. 3 Heat the shrink tube to make it shrink down around the wire. How To Solder - IntroJoining Stranded Wires - Part 1 - YouTube.

Keep the iron in place and touch the solder to the wire until its fully coated. Just like you would do with two solid wires. When the solder touches the.

Insert a piece of heat shrink tube on one of the wire. To tin a wire apply the tip of your iron to the wire for a second or two then apply the solder to the wire. By Mike Allen The most secure and durable way to splice two wires together is to solder them.

The solder should flow freely onto the wire and coat it if its stranded wire the solder should flow into it and fill the wire. Originally Posted by learningarduino. In the first case make sure the bare end of the wire is at least long enough to make a half tun around the screw and always wrap it round the screw in the same direction as you will be tightening it.