How To Solder Small Wires
I tried to burn off the enamel coating on the wire with a small propane torch but it melts the wires.
How to solder small wires. Soldering big wires is generally a bad idea. Use electrical tape over the bent wire and secure it. You can also bend the wire to give it more leverage.
Heat the wire not the solder. I will show you how to solder wires together the right way to seal the solder joint with heat shrink is a must and you also need to make sure you do not have a cold solder joint. Secure wire for soldering.
Tiny wires sometimes only require a quick swipe across the joint to flow the tinned wires together. There must be a better way to do it. Your first task is to strip a small section at the end of the wire.
Request a Quote Today. Get a tiny ball of solder on the tip of your iron and touch it to the joint. I apply the soldering iron tip and the solder to the metal tag near to where the tinned sleeve wire touches it and gradually introduce more solder until the molten blob touches the cable and melts.
Tin the wire and the tab. Repeat this process on the other wire. Offer a Variety Of Connectors.
For 12AWG 14 quick connect terminals will be fine. Then twist the stands together. If you screw up let it cool before you start over so you dont melt too much.