How To Solder Small Wires Together
The solder will follow the heat.
How to solder small wires together. Lock and Firmly Twist the Stripped Wires Together. Put just enough solder to fill the joint. Be able to solder most small electronic components and small circuits together yourself.
Apply Hot Air using Hot Air Blower to. Touch the solder with an iron tip while joining it with the header. Bringing copper wires together through soldering may be necessary to fix electronics or used for a wide range of metal art projects.
Keep the iron in place and touch the solder to the wire until its fully coated. With the ends of the wire facing 180 degrees from each other twist the wires. Make sure your soldering iron is fully heated and touch the tip to the end of one of the wires.
Melting on the side opposite the heat guarantees that the solder will really adhere to the copper rather than just coat the outside. 3 Heat the shrink tube to make it shrink down around the wire. Tin the wires by applying a small amount of solder to the ends of each wire to just barely cover the wire.
Simply tin both wires with suitable flux being used then lay them with the bare ends side by side and touch the hot iron to the pair. For the way we RCers use small wire there is no need to twist or mechanically bind the wires together before soldering them. Using a Wire Stripper Strip the Wires to Desired Length.
It doesnt require a soldering iron and is quite easy to do. Later on melting the other side of the solder to connect it with the wire. Insert Heat Shrink Tubing through the Wire to Cover the Solder Joint.