How To Solder Copper Wire Together
For outlets you can pigtail or just connect an AlCu rated outlet.
How to solder copper wire together. This will heat the wire to allow your solder to melt. Make sure your soldering iron is fully heated and touch the tip to the end of one of the wires. Bring both stripped ends together like shown in the image below.
Place soldering iron under the wire. How to Solder Wires Together Best tips and tricks - YouTube. How To Solder Copper Wire.
This is probably the best solution for lights and other non outlets. Touch the tip of the soldering iron to the copper wires. I dont believe there is any way to join them directly together via a typical soldering connection.
Now is the most important step. Position the tip of the flame on the tubing and touch the tip of the solder to the joint part. Soldering copper is a fairly easy task for the homeowner to complete providing that they follow a few simple instructions.
In this way we will solder both tips together to strengthen the bond. Hook the J shapes together and close them with the pliers. Remove the soldering iron before you apply too much heat.
So place the tip of the soldering gun underneath the wire and feed just a little bit of solder in between the tip and the wire. Plug the soldering guniron into an electrical outlet and allow it to heat up for about three to five minutes. Copper solder in wire form is not suitable for rings or joins that you will be.