How To Solder Car Speaker Wires

Apply heat with a hot soldering tip to both the wire and the speaker wire tab.

How to solder car speaker wires. Soldering two wires together requires a soldering iron and solder. So she bought all the installation components too. Make sure you connect the marked wire to the marked wire and logically the unmarked wire to the unmarked wire.

Hold both ends and tightly twist each end around the other until theyre completely wrapped over each other. One last note speaker wire pairs are marked by some means so you can tell them apart. Should I solder or.

Soldering car speaker wires serves several purposes. How to connect speaker wire to car or home speakers by soldering. Viewers are shown how to solder speaker lead wires to the terminals.

Twisting wires together and then covering them with heat-shrink wrap or electric tape will suffice for car. Soldering will give you a better and longer lasting resultHere is a grea. If that is not the case you should cut off the parts that is touching and test again.

Keep the soldering iron on the bottom of the wire to continue heating it. Another person said tinning would reduce conductivity and to simply screw down the naked wire into a screw type connector using a banana plug and put some silicone sealant over the finished connector. Ive done a few things to it already wife bought me a cd-player for it some door speakers to replace the paperblown ones.

Run the tip of the solder on top of the wire so it melts into the wires. The thinner the solder the easier and faster it melts. That is the key word maintain.