How To Solder Automotive Wiring

Run the solder over the entire splice so it can melt and travel into the gaps between the wires.

How to solder automotive wiring. Make sure you have a clean solid mechanical connection before soldering. Use Rosin Core Solder when soldering wires the flux deoxidizes and allows solder to penetrate into the wire strands. Be sure to remove all of the damaged wire section.

You might be better off introducing them to croc clips and just leave it with them that some wires are difficult to solder. Repeat this process on the other wire. Its the act of using heat via a soldering iron and a fusible metal the solder to create the electrical connection.

Keep the soldering iron on the bottom of the wire to continue heating it. It is best used in automotive since it melts at 370 degrees. Here is a quick lesson on soldering wires and using shrink tube.

Tin the tip of the iron and then clean it with a sponge before heating the wire. Tin the end of both wires by clamping them in your third hand jig and holding the iron under the wire and allowing solder to flow into the wire from above. SOLDERING KIT INCLUDED60-watt digital soldering station with side-mounted solder roller holder removable built-in soldering iron holder to ensure soldering iron safety cleaning Sponge to remove solder residue for future use 2 helping hands to fix welded objects and solder tips holder to put solder tips.

First strip the sections of wire you plan on soldering together. It takes a little more time but it sure holds better than crimping. Tin Plated Copper Plastic.

If you want the kids to be able to solder the wire it will be good for you to tin it first as the flux fumes are also nastier than those of conventionally fluxed solder. During another project you pinched the wire in the door and now you have to replace it. This tool worked the best for me in the automotive application and make it a breeze get that tuff to reach wires repaired soldered and sealed properly.