How To Solder 3 Wires
Compare Pricing Distributors Save.
How to solder 3 wires. Practice before you start in on the bike - get some wire pieces and practice tinning them strip the wire twist the end of the wire to organize the wires and solder it - basically to itself. Hold the two tinned wires on top of each other and touch the soldering iron to both wires. The challenge is holding the wires in place long enough for the solder to cure.
Take your hot soldering iron and melt a small amount of solder on each wire even the unexposed ones. Soldering Multiple Wires for a Distribution Joint Step 1. Please dip the litz wire without removing enamel coating into the soldering jarpot.
You want a good solid joint - and you may have to add some solder to get that. Begin by removing the insulation from the ends of both wires you are soldering together. The first step is you need to strip your wires.
How to Solder Wires. Cover the connection with heat shrink. And allow the solder to melt.
3 Insert the wire end through the hole in the circuit board pad from the top or component side of the board. When you are tinning the wires the resin will help the solder flow smoothly. Dont use too much.
You interweave the threads of the wires together before soldering the joint solid. Set the iron to the solders temperature range. Its not too difficult.