How To Remove Oxidation From Soldering Iron

This means that after every soldering operation you clean your soldering tip dry wet and then tin it before you put the soldering iron back in the tool holder.

How to remove oxidation from soldering iron. Since oxidation occurs through a chemical process you can use another chemical process to remove it. Repeat this process for about three or four times until the soldering irons tip is clean. This article will discuss what causes mild and severe oxidation on soldering iron tips how to remove it and what are the ways to prevent it.

Now remove the tip and clean it with a moist sponge to remove the cleaner. For example some recommend using a fine grit sandpaper while others claim that can also remove the thin iron coating over the tip. Melt some good quality of solder wire on the Tip.

While sandpaper works when used properly if you find yourself spooked by the warnings of damage you can also use chemical cleaners to remove oxidation from your soldering iron tip. Keeping the tip of your soldering iron coated in a thin layer of solder and applying solder to a clean tip before shutting off your iron will help prevent oxidation from occurring since the solder itself is resistant to oxidative and corrosive effects. Oxidation is the worst during soldering IF no flux is used.

The cleaning tool will begin to remove the oxidation. Repeat the steps above until the tip is clean. But for the harder to remove.

Leave it there until the paste melts around the tip. Tip Tinner copper is used to deoxidize and clean your soldering iron tip so that the solder can stick to the iron again. This is done by first ensuring the tip is clean and free of surface oxides.

Last but not least tinning your iron. The steel wool is made with alloys that dont react quickly on the soldering iron. The recommended temperature range of 250C to 300C will allow the flux of the solder to be activated not burned and will start the chemical reaction to remove the oxidation.