How To Remove Oxidation From Soldering Iron Tip

Ive read a number of opinions on how to remove oxidation from soldering iron tips but it seems theres some controversy on which way is best and some claiming certain methods can actually harm the tip.

How to remove oxidation from soldering iron tip. Be careful not to get a thermal shock while doing this. This helps remove impurities such as remnants of solder from previous projects grease oxidation etc. The maintenance of a soldering A soldering iron tip should be cleaned regularly by removing any oxidized solder flux residue and debris from the tip.

Tip Tinner copper is used to deoxidize and clean your soldering iron tip so that the solder can stick to the iron again. Use a damp sponge to wipe away the black oxidation from the tip of the soldering iron until the tip is silver and shines in the light. Heat your soldering iron up to the low end of a typical work range generally between 280 and 320C.

During normal soldering its normal expected to wipe the tip of your iron clean fairly frequently preferably with a wad of brass woolandor a slightly damp synthetic cellulose sponge to remove excess solder oxidation and other soldering debris. It just drips off. Leave it there until the paste melts around the tip.

If theres a stubborn piece of contaminant left on the tip. Switch OFF the Soldering Station or the Iron. Use a protective layer of solder The easiest way to prevent oxidation of a solder tip is to protect it with a layer of solder.

This should lead to a clean shiny tip ready for use for more info see this video. This can be done with a damp sponge or non-abrasive tip. If it happens that the soldering iron tip is oxidized you can clean it with a tip activator and or sanding block.

The tip will be oxidized if you overheat it. ChipQuik is a solder that stays molten for a longer period of time to allow for the removal of components. How To Remove Oxidation From Soldering Iron Tips - Blackfox - Premier Training and Certification.