How To Properly Solder Electrical Wires

This type of terminal barrel lends much better to crimp-then-solder than do pre-insulated terminals.

How to properly solder electrical wires. Solder the Wire Joint. Look for solder that states it uses. Lastly put Solder on the wire especially on the tip.

Use heat shrink to cover the connection. Repeat this process on the other wire. How to Solder Wires Together Correctly Like a Pro.

Cut the wires to the. Now measure cut and solder a wire from the top right potentiometer to the bottom right one. When the Solder is melted it will automatically create a strong bond between the connector and wire.

Once the connection evenly turns the correct silver color of solder remove the soldering iron and allow the joint to cool. The solder should become liquid. Lock and Firmly Twist the Stripped Wires Together.

This is a bare non-insulated B or F type crimp terminal. When done properly you have a strong conductive connection that turns two separate wires into one. This will help conduct heat to the wire.

Soldering to component sockets or element pins. The core can be soldered in the same way. Hold the two tinned wires on top of each other and touch the soldering iron to both wires.