How To Prime A Soldering Iron Tip

If the tip is a little too dirty you can apply a cleaning paste and a tip tinner.

How to prime a soldering iron tip. The solder melts and should stick at the tip. Clean Soldering Iron Tips. Install the prepared tip in your soldering iron.

Soak the sponge using the water squeeze it out a little then use it to clean the tip of the soldering iron. Wipe the iron on a damp sponge to remove the excess. Ad Compare a Huge Selection of Parts.

Heat it up to around 350C and wait. Fit the new tip into the retaining sleeve and screw it back to the heating element. This should leave the tip of the iron with a layer of solder on it.

This should lead to a clean shiny tip ready for use for more info see this video. Then slide the retaining nut over the tip and sleeve and tighten it using your hands. Be careful not to over-tighten the locking nut.

A simple dab on the tip should do the job. Turn the solder pot on and allow it to achieve the desired temperature. Brass wool in a little pot.

This helps remove impurities such as remnants of solder from previous projects grease oxidation etc. When you unbox a brand new soldering iron the first thing you need to do is tin the iron plating on the tip to help protect it from oxidation. Alternatively you can use a special polishing bar particularly of the tip.