How To Make Soldering

Solder is a metal alloy and when it cools it creates a strong electrical bond between the parts.

How to make soldering. Place soldering iron tip on the pad. First you just need to make a standard through-hole soldering connection. Pick up the Soldering Iron in one hand and the solder in the other hand.

Too much or too little flux will cause problems with the solder attaching to the parts. Make sure the soldering iron has warmed up. A general soldering iron consists of a heating region and an insulated handle.

Remove the solder wire from the pad but continue to hold the tip of your soldering iron on the pad and the lead for another second. This will allow the solder to flow all the way around the pad and the lead to create a solid joint. No special solder or soldering iron.

For what its worth though heres what Im using linked out to Amazon. The majority of solder comes in the form of a coiled length of wire or less commonly as pellets with a range of diameters or gauges available to suit various applications and joints. If you tin the tip before you put down the soldering iron for the day it is said that the tip should last longer.

Not only will a knowledge of how to solder and general soldering techniques enable reliable solder joints to be made but the finished electronic project will look much better and it will be possible to take pride in the overall job. Plug in the soldering iron turn it on and let it warm up for 23 minutes. Soldering rarely includes the use of rings.

Create a Standard Through-Hole Solder Joint. Instead melt a blob of solder onto the hot tip then touch the joint and the molten solder will greatly help the heat transfer to heat the joint to soldering temperature. Heats quick gets hot solder.