How To Make A Soldering Iron Out Of Household Items

Dont melt solder on the tip and then wipe it on the.

How to make a soldering iron out of household items. The panels about 5 tall 9 long with a 45 degree angle cut as shown. There are two tools I use for desoldering. Rosin Core Solder Vs.

Tighten the nut with the spanner wrench. Rosin is the same organic material as flux so it is already built into the solder. The solder will clean the surface as it melts.

Step 1 Place a piece of the desoldering braid on top of the jointsolder you want removed. In the package you will get 1 temperature adjust soldering iron 5 soldering iron tips a soldering iron stand a pocket pack soldering tube a pair of anti-static tweezers and a desoldering pump. Make sure you use gloves goggles and an apron.

If its not possible to remove a flammable item be sure to use a heat shield to protect it from the heat of your soldering torch. Use a good overhead light to shine over your workspace. Several types of soldering irons are available such as soldering iron stations adjustable soldering irons wireless irons and pencil irons.

Place your wick against the point where you want to remove solder then hold your irons tip over that point. The good news is that most modern solder is made with a rosin core. This will heat the solder below which will then be absorbed into the desoldering braid.

The solder sucker and the solder wick. Hand tighten the nut at the far end of the soldering iron assembly. Its essentially a tiny blow torch that supplies heat to metal parts that need to be joined together.