How To Clean Soldering Gun Tip

After around 3 months the solder started to stick to the iron tips I like that The Iron is used daily for at least 3 hours I mainly use 3 tips out of the ten different ones.

How to clean soldering gun tip. If the tip is interchanged with different sizes frequently. I use a abrasive metal scouring pad thingy to dip the tip into to clean it. Now remove the tip and clean it with a moist sponge to remove the cleaner.

If you store the soldering iron for a long period of time re-tin the tip to help the iron dissipate excess heat when not in use. They will need to be re-tinned quite often if you use them a lot especially a chisel tip. Just heat this tool just like how you do in a standard soldering iron.

This will save wear and tear on the heating element and extend the life of your soldering iron. If solder does not flow onto the tip. A clean and tinned soldering iron tip ensures good conduction of heat.

Metal wool effectively removes dirt and other contaminants and avoids issues associated with using a damp sponge to clean soldering tips. A polyurethane foam bar with embedded abrasives which is used to polish the working end of the tip to remove surface oxides. So far I have seen no evidence of any wear and they are as sparkly clean as the day I got them despite me doing everything your told not to.

If the tip is very dirty you may want to dip the tip in a commercial tip cleaning paste and then wipe it clean on the damp soldering sponge. As the vacuum runs put the device closer to the joint that you want to disconnect. How to clean and re tin your soldering iron - YouTube.

Blade tips are used for reworking a soldering section or for cleaning the pad of the soldering item. Use a wire brush or fine sandpaper to get the surfaces clean. After a minute or two the iron should be hot enough to steam when touched to the sponge.