How To Clean Solder Iron Tips

Wipe OFF the solder on the Cleaning Sponge or Copper Wool.

How to clean solder iron tips. If theres krud building up that doesnt come off with the sponge wipe it on a cleaning wireIf the tip gets really bad it can often be restored with a chemical tip tinner. Leave it there until the paste melts around the tip. Fit the new tip into the retaining sleeve and screw it back to the heating element.

Use fluxes Spongeless and metal wool to remove small amounts of contaminants from your soldering iron tips during soldering circuit board or any other components. Then slide the retaining nut over the tip and sleeve and tighten it using your hands. Try not to leave the iron sitting hot on the bench while not in use.

How to clean and re tin your soldering iron - YouTube. This is done by first ensuring the tip is clean and free of surface oxides. How to Tin or Re-Tin Soldering Iron Tip.

It took a lot of effort with tip tinnercleaning compound to make the solder wet the tip again. Push the soldering iron tip into the chemical cleaner until the entire rusted area is submerged. Good soldering process is important.

Like other posters have said to make the tip last longer leave a blob of solder on the tip when you are done. Its something of a vi-vs-emacs war about which is better but whatever. This will protect the iron from oxidation as the solder serves as a sacrificial buffer zone against oxidation it oxidizes rather than our tip.

Dip the tip into the tinner making sure that the entire oxidized surface is in contact with the re-tinning product. Then dip into the tin of tinner cleaner with a slight twisting action. Set the temperature of the soldering iron between 250C and 300C.