How To Clean Oxidized Solder Tip

Kindly note that oxidation can still occur in future even after re-tinning the tips.

How to clean oxidized solder tip. After every cycle and before you start to solder always clean your tip. Use fluxes Spongeless and metal wool to remove small amounts of contaminants from your soldering iron. Case 1 If the tip oxidizes.

Just wipe the oxidized tip at normal soldering temperatures into the tip tinner for a few seconds until the bright tinning surrounds the working end of the tip. If the iron tip is heavily oxidized then you should clean it with a different technique. The best thing is even to put some more solder on the top when you are done.

Use a protective layer of solder The easiest way to prevent oxidation of a solder tip is to protect it with a layer of solder. These tips will make sure your soldering tip does not become oxidized and need to be re-tinned. Quickly insert hot soldering iron into coils of brass wool tip cleaner and twist it few times.

Clean the tip. Heat up the iron and dip it in that stuff. How to repair and renew worn out solder tip.

How to Re-Tinner Your Solder Tip. Repeat the process until the solder melts and wets the tip surface. But if any of these things are neglected in the soldering process you may need to re-tinner your tip.

Have a can of rosin and solder ready for use can open and o. The best solder for oxidation prevention is one with a high amount of flux core. Clean the Tip.