How To Clean Glass Filters
Wash your filters with cold water only.
How to clean glass filters. To clean glass simply mist your tabletop or windows with your homemade cleaning solution. If your filter or cloth wipes get too damp switch them out for fresh wipes. For example glass pearls require around 215 litres to successfully backwash a Waterco S600 Media Filter whereas sand needs roughly 265 litres.
Boiling or hot water. Allow the filters to air-dry naturally. Glass pearls use roughly 20 per cent less backwash water than sand filter media saving time and therefore energy and using less water.
Flush well with water or column. Step 1 Check your pressure gauges. However if your sand filter has just an inlet pressure gauge a rise in pressure of 8 to 10 psi indicates Step 2.
Some models have filters that require a short pre-soak in cold water before rinsing. Replace the filters or for glass filters soak them in concentrated nitric acid 35 for one hour or sonicate stainless filters for 1 hour. How to clean Extractor Fan Filters.
Spray onto glass edges and around the faucet and let it sit for 15 minutes. Before cleaning your eyeglasses wash your hands thoroughly. If you notice that any of the filters are damaged or just not coming clean you can order a replacement part for improved performance.
Use lotion-free soap or dishwashing liquid and a clean lint-free towel. If its extra gross or caked with food residue let it soak in warm soapy water. If your sand filter has both an inlet pressure gauge and an outlet pressure gauge a pressure differential of 16 and 20 psi means it is time to clean your filter.