How To Clean A Dirty Soldering Iron Tip

Wipe OFF the solder on the Cleaning Sponge or Copper Wool.

How to clean a dirty soldering iron tip. This should lead to a clean shiny tip ready for use. It is a much stronger flux that will clean and tin the tip. This comes in a little pot that you push the tip into.

In this case you have to damp down the steel wool and rub the metal tip of the soldering iron and as a result it will remove the rust and stains. Sal ammoniac for cleaning your stained glass soldering iron tip comes in a solid block form similar to that of a bar of soap. A simple dab on the tip should do the job.

Flood the tip with solder after cleaning to cover the entire working surface of the tip. If the tip loses its tin you want a product called tinning salts or sal ammoniac to restore wettability then re-tin with your usual solder. Alternatively you can use a special polishing bar particularly of the tip is corroded or extremely dirty.

Switch on the Soldering Station or the Iron and Make sure it is Hot Enough. Cardboard works in a pinch. This step will coat the iron in a mixture of flux and solder.

The best tip tinner is your solder--tips should always be coated with a small amount of solder. Another option is to use tip cleaner. Use fluxes Spongeless and metal wool to remove small amounts of contaminants from your soldering iron tips during soldering circuit board or any other components.

Cleaning Your Soldering Iron. If some of the oxides are just sticking really well you could try to mildly abrade them on a brass sponge copper braid or similar but you cant be too hard or you will damage the iron plating good tips are typically copper core plated with iron then chromium everywhere but the. Electronix Express points out that in order to remove the dirt and debris that accumulates on the tip of a soldering iron it is necessary to wipe it clean with a sponge.