Can You Reflow Solder With A Heat Gun

It should not be used for soldering since you have no control over the temperature.

Can you reflow solder with a heat gun. Note if you are using a paint stripping gun from the hardware store the nozzle and potentially the air flow might be rather large. I mean a heat gun like hot hot for removing paint and stuff. It describes the four stages of reflow soldering and provides the times and temperatures for each of the four stages when using a soldering reflow oven.

So i guess your first answer. The four stages are. Often one side of the IC will go first so the IC gets a sideways tilt.

The heat gun produces a lot of air that can blow these parts away. Hot air and paste is viable yeah. Can you reflow solder with a heat gun.

It would take forever. Or do you recommend I purchase a heat gun and a. If a real heatgun point it at the gpu die and do that for a while and see if its better.

A common heat gun is an inexpensive way to reflow or reattach electronic components that have been soldered together. Able to reflow the GPU successfully. Some heat guns get a lot hotter than others and some solders melt at far lower temperatures than others.

Keep heating until you see the IC level off again. Is it possible. This would be rather tricky to do with a heat gun IMO.