Best Way To Solder 2 Wires Together

Let the solder melt and flow over the wires.

Best way to solder 2 wires together. Ad Wholesale Mobile Accessories Parts Electronics With 12 years Experienced Supplier. Wire nuts have a conical threaded metal insert in the tip which when tightened onto the wires cuts into them. Heat the copper and apply solder to the side opposite the heating implement.

Im starting the wiring for my project and would like to solder two resistors together in series. Tin the soldering gun ie melt a little solder on it. Place the heat shrink over the wire and keep it away from the area to be soldered.

Twist the wires together. First put heat shrink tubing on one wire and slide it out of the way so you can shrink it on later. It must be extremely tight to work properly.

One of good ways to solder 2 wires is tin to both wires first and then put them next together melt the solder from one of them and they will stick together easily. Ad Find China Manufacturers Of Solder Wires. Ad Find China Manufacturers Of Solder Wires.

When done properly you have a strong conductive connection that turns two separate wires into one. The best way to know if your solder joint is hot enough is when you can see the strands of the wire in the solder itself. Tools need will be a soldering iron heat machine rosin flux solder 3M silicone dielectric grease wire s.

To get started use wire strippers on the wire so you have bare wire exposed. Typically the easier and more efficent way of creating a cable connection is crimping. There is good chance that the wire will be exposed to heat and gentle turbulence.